Mega System Tech iCV-01a Bedienungsanleitung Seite 1

iCAMView PROUser Manual Version 10.04 For models: iCV-01a / iCV-03a / iCV-08

Chapter 3: Web Interface 3.2.1 To View Video To view video from the connected camera, click on either ActiveX or Sun Java next to an opened eye. By

MultiMonitor Manually adds iCAMView camera to be monitored. a. Access by iCAMView Address Host Address: Enter either the WEB address (without the

MultiMonitor Highlight the unit to be deleted from iMultiView list. Click Yes to confirm deletion. 1.2.4 Group This will bring up a folder listin

MultiMonitor Rename Click to rename the group. Properties… Click to bring up the group properties dialog box. 9

MultiMonitor 1.2.5 Setting Use this function to change the selected iCAMView IP Address & UDP Port Number. Display the current Camera settin

MultiMonitor Camera Select: Select either camera A or B Account: If you have setup user account, the information must be entered here. Otherwise

MultiMonitor Sensitivity: Choose from 0% to 100% (very sensitive) Window on-top when Motion Detected Automatically displays camera window on top o

MultiMonitor Path Click Browse to change the file location. Note: a. Recorded files are saved using the following file extension; avifile[three digi

MultiMonitor Notified Email Address Click Add… and enter a new Email address below Click Modify… to modify the entered Email Address Click Delete to

MultiMonitor port as set in; a. Web Interface, Basic Settings  Network  Port Number  HTTP port number or in b. Utility, IP Configuration  Advanced

MultiMonitor Zoom window to face area Zoom window to facial area. Zoom window to main face area Zoom in to the biggest object. Zoom window to al

Chapter 3: Web Interface Once installed, the video will stream. Click the record button to start video recording. The default directory is; C

MultiMonitor 1.2.6 Monitor Highlight the iCAMView unit in the main windows display, and click Monitor to view the video stream. Move the

MultiMonitor Window marquee tool. Click to marquee a custom window. This feature has two functions; a. Custom window zoom – zoom to custom

MultiMonitor Release and iMultiView will zoom to the marquee area. Increase the resolution for a better image quality. While zoomed in, the user

MultiMonitor Release to set the window frame. Video in this custom window will be updated while those outside are ‘frozen’. You can digitally pan

MultiMonitor Small icon view (default) Large icon view Multi-View mode 21

MultiMonitor 1.2.8 Event Log Display the Event Log (IP address, Port, date, Time, description of event) of the selected iCAMView unit. 1.2.9 Opt

MultiMonitor 1.2.10 User Change Password … Use this feature to change the User’s login password to iMultiView. Either Administrator or User can cha

MultiMonitor Account: Enter the preferred account name (max of 10 characters). The Account name cannot be edited. Password: Enter a password (max o

MultiMonitor 1.3 Drag-and-Drop Feature iMultiView feature a “Drag-and-Drop to Desktop” function. Double click the icon on your desktop to immediat

Chapter 3: Web Interface To change the saved location and filename. Click and the Save As window will pop up. Choose an alternate location or filena

Chapter 3: Web Interface Using Sun Java Controls: Once you click on Sun Java the following pop-up window will appear. Click this to Marquee an area

Chapter 3: Web Interface This indicates the full pan-tilt range of the USB Camera. This is the area and position the camera is currently showing. i

Chapter 3: Web Interface 3.2.2 Information The Information tab contains the following subsections; 3.2.2.1 System Status, 3.2.2.2 Current Connectio

Chapter 3: Web Interface 3.2.2.2 Current Connections Fig.10 iCAMView Current Connections The Current Connections page shows all the users currentl

Chapter 3: Web Interface Fig.12 iCAMView Event Log: Administrator privilege. Fig.13 iCAMView Event Log: Operator privilege. iCAMView - user manu

Chapter 3: Web Interface 3.2.2.4 NetFeeler Lite (only when such a device is connected) This section becomes available if an Environment Sensor called

Chapter 3: Web Interface 3.2.3 Basic Settings The following option allows the user to customize their unit. 3.2.3.1 Camera Settings 3.2.3.2 Patrol Se

CONTENTS Chapter 1: Introduction ________________________________________ 1 1.1. Features ______________________________________________ 1 1.2. iC

Chapter 3: Web Interface Enter a suitable location / name for the camera. This information will be displayed when viewing video using Java VM. Light

Chapter 3: Web Interface Fig.16 iCAMView Patrol Settings i. Patrol Setting This section allows the user to define hotspots, required patrol boundar

Chapter 3: Web Interface Enter a name for the selected hotspot Patrol Setting Enter a name for the selected hotspot Boundary This defines the camera

Chapter 3: Web Interface Fig.18 iCAMView NetFeeler Lite Settings i. NetFeeler Lite Temperature High / Low Select the maximum / minimum temperature

Chapter 3: Web Interface Enter iCAMView Subnet Mask. The value is normally 255.255.255.0 Gateway This item is to set iCAMView Gateway. To learn more

Chapter 3: Web Interface iv. Dynamic DNS This is a free service that allows the user to alias a dynamic IP address to a static hostname. No matter h

Chapter 3: Web Interface Note: In order to Activate the unit, iCAMView DDNS feature MUST be Enabled first under Basic Settings Æ Network Æ iCAMView

Chapter 3: Web Interface Note: Enter a valid Email address. In the event you have forgotten the password to your DNS account, a new password w

Chapter 3: Web Interface • dyn.chamber.ee • DHS International • DynDNS Free • DynDNS Custom • myDDNS • ZiVE Click Update to get latest list of S

Chapter 3: Web Interface Fig.23 iCAMView PPPoE setting When Connection should be made Disabled : Default setting. Connect always : iCAMView will a

Appendix C: IP Address, Subnet and Gateway ____________________ 72 Appendix D: Glossary ________________________________________ 74 ii

Chapter 3: Web Interface Fig.24 iCAMView Wireless Setup Connect to Wireless AP When a compatible Wireless USB dongle is connected, select Yes and cl

Chapter 3: Web Interface Fig.26 User Account Settings User Name Assign a User Name or “account” name. The administrator can set a name consisting

Chapter 3: Web Interface Max FPS This allows the Administrator to limit the bandwidth allocated to each account. The Administrator can set a figure

Chapter 3: Web Interface 3.2.4 Advanced Settings This section allows the Administrator to set up some of the features available in the server. 3.2.4.

Chapter 3: Web Interface The available Email addresses are listed here. Refer to section 3.2.4.3 on how to enter an Email address to the Address Bo

Chapter 3: Web Interface Fig.30 Event Selection List By default, all the events are selected but not confirmed. Click Apply to activate and confirm

Chapter 3: Web Interface Fig.31 Event Notification: User Login Details (Date, Time, Camera & IP) Fig.32 Event Notification: Camera A Motion De

Chapter 3: Web Interface 3.2.4.2 Image Settings This page allows the Administrator to set various items related to video detection. Only an Adminis

Chapter 3: Web Interface Send to FTP Server Click Yes to activate. This option allows the administrator to send and store the motion detected images

Chapter 3: Web Interface Send Email Select Yes to send an email when motion is detected. Note: The image size received by Email / FTP depends on the

Chapter 1: Introduction Chapter 1: Introduction 1.1. Features iCAMView is a compact stand-alone web-server capable of remote video surveillance.

Chapter 3: Web Interface Fig.36 Image Recording webpage Enable Click Yes to activate this feature. Begin – End (hh:mm) The Administrator can deter

Chapter 3: Web Interface Fig.37 Email of Image Recorded 3.2.4.3 E-mail / FTP This webpage sets up the necessary Email and FTP server information.

Chapter 3: Web Interface i. FTP Settings Fig.39 FTP settings FTP Server The Administrator will have to enter the full FTP server address here. Acco

Chapter 3: Web Interface Enter the password for the above account name. Click Apply to save the changes. iii. Sending Test Mail Fig.41 Sending a

Chapter 3: Web Interface Fig.44 Confirmation email The administrator can also check Information Æ Event Log for confirmation or failure. Fig.45 Eve

Chapter 3: Web Interface Fig.48 System Settings page i. System Time Fig.49 System Time System Time Updates The administrator can set an interval fo

Chapter 3: Web Interface Fig.50 Add Time Server dialog box Time Zone (Relative to GMT) Select the appropriate time zone. Click Apply to save chang

Chapter 3: Web Interface 3.2.4.5 iMage Server The iMage Server allows the user to view his camera directly from the internet without having to set-u

Chapter 3: Web Interface ii. iCAMView Master Password (both information are located on the label behind iCAMView) Fig.54 iMage Server login page

Chapter 3: Web Interface Fig.56 iMage account successfully created. 4. Click Sign In, and click Add / Remove Unit. Enter the Serial Number and Comm

Chapter 1: Introduction Once iCAMView is installed, the user can check any of the connected PC cameras using a standard web browser. The user can moni

Chapter 3: Web Interface 3.2.4.6 Language Use this section is to set iCAMView language interface. i. Interface Language iCAMView - user manual

Chapter 3: Web Interface At the moment, the user can choose the following versions; • English, • Traditional Chinese. • Simplified Chinese. ii. Em

Chapter 3: Web Interface Reset to factory default This function will reset all settings to its default value. Note: iCAMView will request for the

Chapter 3: Web Interface 3.2.5 USB Disk This section is only available if a USB flash disk with FAT32 format is connect. 3.2.5.1 Video 3.2.5.1 Vide

Chapter 4: View Images Using PDA / PPC / mobile Chapter 4: View Images Using PDA / PPC / mobile iCAMView supports image viewing from a GRPS / WiFi en

Chapter 4: View Images Using PDA / PPC / mobile e. The default file name is showimg_pda.jpg, click Save As… to change the file name or save location

Appendix A: Router Configuration Appendix A: Router Configuration The following section describes the initial configuration of the router and port fo

Appendix A: Router Configuration MN-500 Wireless Base Station NETGEAR RP614 Web Safe Router MR814 Wireless Router MR314 Cable/DSL Wireless R

Appendix A: Router Configuration 3Com (http://www.3com.com) 3C857-US – OfficeConnect Cable/DSL Gateway 3CRWE52196 – OfficeConnect Wireless Cable/DSL

Appendix A: Router Configuration Belkin (http://www.belkin.com) F5D6230-3 – Wireless Cable/DSL Gateway Router 1. Log into your router using your rou

Chapter 1: Introduction Fig.2 iCAMView Front and Back view LED Status Indicators on ICAMViewLight color Signal definition Condition descriptionRED

Appendix A: Router Configuration Private Port 80 to 80 Line #2 Enable: Checked in Description: iCAMView – Camera Internet Port: 9001 to 9001 Type:

Appendix A: Router Configuration D-Link (http://www.dlink.com) DI-604/DI – 614+/DI-624 1. Log into your router using your router IP. 2. On the main

Appendix A: Router Configuration Enabled/Disabled: Enabled For ID#2 Service Port: 9001 Service IP: Type in the camera’s IP address, for example: 19

Appendix A: Router Configuration Dell (http://www.dell.com) TrueMobile 2300 Wireless Broadband Router 1. Log into your router using your router IP.

Appendix A: Router Configuration Linksys (http://www.linksys.com) BEFSR41 – EtherFast Cable/DSL Router BEFSX41 – Instant Broadband EtherFast Cable/DS

Appendix A: Router Configuration Microsoft (http://www.microsoft.com/hardware/broadbandnetworking) MN-100 – Wired Base Station MN-500 – Wireless Base

Appendix A: Router Configuration NETGEAR (http://www.netgear.com) RP614 – Web Safe Router MR814 – Wireless Router 1. Log into your router using your

Appendix A: Router Configuration Line #2: Starting Port: 9001 Ending Port: 9001 Server IP Address: Type in the camera’s IP address, for example:

Appendix A: Router Configuration D. Local Server Address: Enter the IP address of the camera E. WAN Users Address: Any F. Click Apply. 12. Click

Appendix A: Router Configuration Proxim (http://www.proxim.com) ORiNOCO BG-2000 Broadband Gateway 1. Log into your router using your router IP. 2.

Chapter 2: Hardware Setup Chapter 2: Hardware Installation The following details the hardware installation procedure for iCAMView IP camera. Step 1:

Appendix A: Router Configuration Siemens (http://www.speedstream.com) SpeedStream 2602 – 2-Port DSL/Cable Router SpeedStream 2623 – Wireless DSL/Cabl

Appendix A: Router Configuration 7. Under Internal Port No type in: 80 8. Under External Port No type in: 80 9. Click on Add to save these settings.

Appendix A: Router Configuration SMC (http://www.smc.com) SMC2404WBR – Barricada Turbo 11/22 Mbps Wireless Cable/DSL Broadband Router SMC7004VBR – Ba

Appendix A: Router Configuration For ID #2: Service Port: 9001 Private IP: Type in the camera’s IP address, for example: 192.168.0.5 (Look at iCAMV

Appendix B: Methods to Update WebCAM Firmware Appendix B: Methods to Update iCAMView Firmware You can update iCAMView firmware using any of the follo

Appendix C: IP Address, Subnet and Gateway Appendix C: IP Address, Subnet and Gateway This section discusses Communities, Gateways, IP Addresses and

Appendix C: IP Address, Subnet and Gateway Subnetting and Subnet Masks Subnetting divides a network address into sub-network addresses to accommodate

Appendix D: Glossary Appendix D: Glossary The Glossary section defines the terms used in this User Manual Term Definition Ethernet Local Area Netw

iCAMView Utility User Manual Version 3.5

CONTENTS 1.0: Introduction_____________________________________________ 2 1.1. Installation______________________________________________ 2 1.2.

Chapter 3: Web Interface Chapter 3: Web Interface 3.1. Introduction iCAMView is designed to work without having to install any software. All the nec

iCAMView Utility 1.0: Introduction This is a program that helps the user perform quick installation. It will detect the current configuration and tak

iCAMView Utility c. After the installation is completed, MultiMonitor program will appear in Windows Start  All Programs  iCAMView  MultiMonitor

iCAMView Utility 2. Click on Setup Wizard. 3. The Administrator Authentication login window will appear. This is blank by default. If one has bee

iCAMView Utility Obtain an IP address by DHCP Choose this if you want your Router to assign an IP address to iCAMView. Use the following IP Address

iCAMView Utility Choose this if you want iCAMView to connect directly to your xDSL line. a. Select Enable PPPoE connection b. Enter your account and

iCAMView Utility 9. Click Next > to confirm these configuration. 10. Click Next > to save and restart iCAMView with the new configurations.

iCAMView Utility 1.2.2 Launch iCAMView Click Launch iCAMView or double click the iCAMView listed in the table to launch it. Click either one to Lau

iCAMView Utility Enter the Account (Login Name) and Password (Login Password) set earlier. Otherwise, use the default login and password at the back

iCAMView Utility Select the Unit and then click IP Configuration. Select the iCAMView unit on the right display screen, and click IP Configuration.

iCAMView Utility Choose this if you want your Router to assign an IP address to iCAMView. This is the default setting. Obtain an IP address by Boo

Chapter 3: Web Interface 3.2. Using the Web Interface The iCAMView webpage main menu is divided into two sections. The selection menu on the left a

iCAMView Utility Once set, Utility will request for the Device Password when you try to click on either, Setup Wizard, Launch iCAMView or IP Configu

iCAMView Utility Uncheck to disable this function. Example: If a value of say, 8080 is set as the HTTP port number, then enterhttp://192.168.0.177:

iCAMView Utility 1.2.6 Refresh Utility will automatically search for any iCAMView IP cameras that are connected in the same LAN. It will periodica

iMultiView User Manual For v4.10 For use with iCAMView Plus & iCAMView PRO

CONTENTS 1.0. Introduction_____________________________________________ 2 1.1. Installing the program from CD_____________________________ 2 1.2.

MultiMonitor 1.0. Introduction iMultiView is a program to manage multiple WebCAM. It is able to detect the IP address of all WebCAM installed in LA

MultiMonitor b. After the installation is completed, iMultiView program will appear in Windows Start  All Programs  iCAMView  iMultiView for Win

MultiMonitor 4

MultiMonitor Click Finish and the iMultiView Logon window below will pop up. Just click OK to start using iMultiView Note: The default secu

MultiMonitor Fig.1 iMultiView Interface 1.2.1 Enumerate Start iMultiView and press the “Enumerate” button, iMultiView will start a search for all t