Mega System Tech iCV-03 Bedienungsanleitung PDF herunterladen (Seite 35)

OCTE SAFEdoc

FAB

Metal Lathe

1. Wear Personal Protective Equipment (PPE) such as safety glasses, safety goggles, face

shields, gloves and proper clothing as appropriate. No loose clothing, long hair or jewelry

is allowed in the shop.

2. Do not operate the lathe without the instructor’s permission.

3. Be aware of the position of the on/off switches and emergency STOP button.

4. Make sure headstock, tailstock and tool rests are tight before operating.

5. Ensure your material is secure before starting motor.

6. Ensure all tool bits are sharp and without nicks. Show your instructor any problems with

the tooling.

7. Do not operate lathe till you have established proper speeds, stops, tool heights and

angles.

8. Make sure you have proper speeds and feeds for the type of material and tool bits, type of

operation, and diameter of material. When in doubt, ask.

9. Assume a solid position with your body to the side of the tool. Be sure to have firm footing

when operating the lathe.

10. Remove cut off material with a brush. Never use your hand.

11. Turn the lathe off immediately if it does not sound right or if there is excessive vibration.

AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR

FAB SAFEdoc Page 32

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 119 120

Keine Kommentare

Mega System Tech iCV-03 Bedienungsanleitung Seite 35