Mega System Tech iCV-03 Bedienungsanleitung PDF herunterladen (Seite 45)

OCTE SAFEdoc

FAB

Scroll Saw

1. Wear Personal Protective Equipment (PPE) such as safety glasses, safety goggles, face

shields, gloves and proper clothing as appropriate. No loose clothing, long hair or jewelry

is allowed in the shop.

2. Do not operate the Scroll Saw without the instructor’s permission.

3. Follow the manufacturer's instructions for changing tool accessories.

4. Be aware of the position of the on/off switches and emergency STOP button.

5. Ensure that the correct blade is being used for the type and size of material. Use the

correct speeds for the material being cut (variable speed machines).

6. When pushing the work through do not force the piece. Keep fingers clear of the blade

path. Use both hands and keep fingers at least 10 cm. (4 in.) from the blade at all times.

7. Never pull or force a jammed piece through the equipment. Shut the power off and then

carefully dislodge the piece.

8. If the blade is dull change it. (Make sure the machine is locked out). Make all adjustments

with the power off.

9. Make sure the hold down is resting on the work piece.

10. Plan your cuts carefully. Saw curves gradually. Sudden twists will cause the blade to bind

or break. Use relief cuts if necessary. Always make a short cut first. Avoid backing out of

cuts with the power on. Backing out of a cut may cause the blade to bind

11. If the blade breaks, turn the power off immediately and step back. Inform the instructor

immediately.

12. Remove scrap pieces from the table only after the blade has stopped.

13. Always operate the saw from the front never from the side. Keep your hands beside or

behind the blade; never in front. Do not leave the scroll saw until the blade has stopped.

AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR

FAB SAFEdoc Page 42

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 119 120

Keine Kommentare

Mega System Tech iCV-03 Bedienungsanleitung Seite 45