Mega System Tech iCV-03 Bedienungsanleitung PDF herunterladen (Seite 47)

OCTE SAFEdoc

FAB

Table Saw

1. Wear Personal Protective Equipment (PPE) such as safety glasses, safety goggles, face

shields, gloves and proper clothing as appropriate. No loose clothing, long hair or jewelry

is allowed in the shop.

2. Do not operate the table saw without the instructor’s permission. Follow the

manufacturer's instructions for changing tool accessories.

3. Be aware of the position of the on/off switches and emergency STOP button.

4. Make sure the floor is clear in the work area.

5. Check the blade for flaws (replace if damaged, worn, or dull) Make sure auto kick-back is

in place. Secure the fence position before beginning. Always keep the work firmly down

on the table while pushing it past the blade.

6. Always “lock-out” the table saw before changing blades.

7. Never reach over the blade.

8. Always use a push stick when the fence is set under 3" to the blade.

9. Ask for assistance when working with large pieces.

10. Wear a dust mask when cutting treated wood or when there is a fine dust hazard.

11. Stand clear of possible kickback. Keep your hands clear of the blade path.

12. When working with a partner ensure you have clear communication. The second person

should stand behind and to the left of the blade.

13. Do not feed the material faster than the saw will accept.

14. Use a fence when making a rip cut and a mitre gauge to make cross-cuts. Never cut a

piece of material free-hand. Keep the work against the fence throughout the operation.

15. Report all unguarded and inadequately guarded equipment promptly to your instructor.

16. Always check the machine guards to make sure they are in place and operating, before

using the machine.

AT ALL TIMES – IF IN DOUBT, SEE YOUR INSTRUCTOR

FAB SAFEdoc Page 44

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 119 120

Keine Kommentare

Mega System Tech iCV-03 Bedienungsanleitung Seite 47